• info@cms.uk.com
  • Call Us: +44 (0) 1371 60 60 50
  • Unit 17, Zone D Chelmsford Road Industrial Estate, Great Dunmow, Essex, CM6 1XG

Pat Testing Essex

Pat Testing Essex

Avoid a SHOCKING Experience

Get all your electrical devices PAT tested by CMS Testing Services

Shocking Experience

All businesses are legally required to ensure that all electrical appliances do not cause any danger to staff or visitors.

A periodic PAT test is a way of ensuring that you are meeting your legal requirements under the following acts and regulations –

  • The Management of Health and Safety at Work Act Regulations 1999.
  • The Provision and Use of Work Equipment Regulations 1998.
  • Electricity at Work Regulations 1989.
  • The health and Safety at Work Act 1974.

Our testing is carried out by qualified engineers who have been DBS checked.

We only use the latest calibrated testers.

Appointments available at a time and date to suit you.

Our Rates

Click to check our current testing rates or contact us for more details.

For further information or to book an appointment please email CMS Testing Services on sales@cmstestingservices.co.uk, telephone us on 01371 606050 or text QYLGR PATTEST to 60777.

What should be tested?

All electrical items that are designed to be connected to mains power or a generator power supply that are not part of the fixed building wiring comes within the remit of PAT testing. This includes items that are not usually considered to be ‘Portable’ such as hand dryers, heated towel rails or built in dish washers, boilers and cookers. The testing frequency of these fixed items can often be longer than more portable items such as a vacuum cleaner or a hand held drill.

Battery powered items such as cordless drills only require a visual check but the battery charger used with them will require a full PAT test. All IT equipment should be tested along with any power cords that are used to power them. These power cords are treated as separate items as different standards apply to them. Electric cable extension leads must also be tested and these are often the most commonly failed items.

The testing frequency of each item is down to a risk assessment by the duty holder but there are recommended test frequencies based on the type of equipment and the environment where it is operated. For more details please contact us.

What is included?

All of our testing is carried out to the IET Code of Practice (4th Edition)

  • All plugs checked for suitability and damage.
  • Check correct fuse is fitted.
  • Check power cable for damage – quote for replacement if faulty.
  • Check case is intact and item is in working condition.
  • Check for earth resistance, isolation resistance and leakage current according to class of device.
  • Each item individually labelled with a PASS or FAIL label.
  • Full itemized report showing all measurements taken.
  • Certificate of Testing.

We can also test Three Phase Systems, Spur connections, Extension Leads, RCD and Surge Protected Devices. Please call for prices

If you need other services please call us and we will be more than happy to assist you.

  • If you have any questions regarding our PAT Testing Services, please don't hesitate to get in touch.

About Cambridge Microprocessors

Cambridge Microprocessor Systems Limited are pioneering designers and manufacturers of bespoke communications systems, electronic controllers, data loggers, networking and network peripherals, signal conditioning systems, and embedded controllers for use in aircraft testing, stock control, oil and petrochemical exploration, marine science, laser control, environmental control, and training and education. They also provide PAT Testing services to ensure their customers premises and equipment comply with legal requirements.

Based in Great Dunmow, Cambridge Microprocessor Systems are ideally located to provide PAT Testing Services and bespoke communications equipment to clients throughout Essex, including Chelmsford, Dunmow, Harlow, Braintree and Bishops Stortford.

Areas & Services